Insertion of a sliding film to simplify the installation of the cable prior to installation
Liner calibration using compressed air for optimal adaptation to the existing surface of the pipeline walls
curing according to the installation instructions
after curing: removal of the packers at the ends of the liners from the wells
inner film removal
if necessary: check the tightness of the refurbished pipe
opening of the side inlets, allowing quick re-commissioning of the line and sewer system
The polymer liner is the know-how for trenchless pipeline repair.
With good mechanical properties fiberglass liner is used in reconstruction all over the world.
The liner is manufactured from chemical and corrosion resistant glass. The special method of laying glass fiber and saturation with resin in the conditions of the plant using a special technology allowed the liner of the M series to become a leader in the reconstruction of small deformations of the pipeline.
Low energy costs, convenient equipment, short curing time can significantly reduce your costs.
Round, ovoid or bottle-necks, box-shaped.
Type S+
Use in particularly difficult cases
Even higher characteristics of the modulus of elasticity and ultimate strength allow the liner to be used in difficult cases when rehabilitating pipelines. It is the increased characteristics that make it easy to restore used-up pipes in free-flow pipelines.
Slight reduction in pipe cross-section
A reduction factor of 1.28 and a high modulus of elasticity allow the use of a smaller wall thickness, in contrast to other insert liners, which gives a slight decrease in the pipe cross-section under extreme static loads.
Immediate leak test
The inner film of liner is only an aid during installation and is removed immediately after curing, which means that the tightness of the pipe can be checked immediately. All numerous tests carried out by research institutes have shown excellent results.
All Liners sections
Round, ovoid or bottle-necks, box-shaped.
Even higher characteristics of the modulus of elasticity and ultimate strength allow the liner to be used in difficult cases when reconstructing pipelines. It is the increased characteristics that make it easy to restore used-up pipes in free-flow pipelines.
A reduction factor of 1.28 and a high modulus of elasticity allow the use of a smaller wall thickness, in contrast to other insert liners, which gives a slight decrease in the pipe cross-section under extreme static loads.
Round, ovoid or bottle-necks, box-shaped.
Even higher characteristics of the modulus of elasticity and ultimate strength allow the liner to be used in difficult cases when reconstructing pipelines. It is the increased characteristics that make it easy to restore used-up pipes in free-flow pipelines.
A reduction factor of 1.28 and a high modulus of elasticity allow the use of a smaller wall thickness, in contrast to other insert liners, which gives a slight decrease in the pipe cross-section under extreme static loads.
The inner film of liner is only an aid during installation and is removed immediately after curing, which means that the tightness of the pipe can be checked immediately. All numerous tests carried out by research institutes have shown excellent results.
The world’s first fiberglass liner for trenchless reconstruction of drinking water pipes.
Completely unique design of the structure of the AWWA (American Plumbing Works Association) Class 4 liner. Certified for use in drinking water pipes by NSF / ANSI 61 (International Foundation for Consumer Protection and Quality Control of Products that Affect Human Health / American National Standards Institute).
Compliance with hygienic standards of the production process.Sealing against internal water ingress. Factory impregnated with resin.Installation method — pulled in place — no contamination by dirt, liquid fraction or lubricants. UV treatment kills bacteria.
No exposure of people or the environment to resin, chemicals or high temperatures. Low environmental impact in case of trenchless reconstraction of pipelines.
Continuous monitoring and quality control of all raw materials and resin mixtures used in the manufacture of the H2O liner, in our own laboratory and on the test bench. Highest quality and reliability on the market.
The resin-impregnated liner can be stored for up to 6 months.No time limit during installation: you determine the time of work.
Liner made of fiberglass for trenchless reconstruction of damaged or depressurized drinking water pipes. Films installed on the inside and outside protect from contamination, from emulsification with resins; maintain the design wall thickness. Factory impregnated with styrene-free resin: Storage life up to 6 months.